Article List
-
Current Status Of Boiler Water Treatment
1, The utilization rate of water treatment equipment is very low, and the water quality has not been tested extensively.Boiler water treatment equipment utilization rate is low, most of the boiler is not equipped with water treatment equipment, or configuration, but the utilization rate is not high.
Article July 26, 2017 -
Wet Maintenance and Dry Maintenance of the Disabled Boiler
When the boiler is permanently deactivated, people should pay great attention to the furnace outside the anti-corrosion maintenance issues. First, after the boiler cooling down, you must completely remove the fouling of the heating surface and the ash in the upper part and under part of the furnace.
Article July 24, 2017 -
Principle of Waterborne Coating Dispersant
Most of the dispersant achieve the purpose of dispersing the color filler through the process of wetting, grinding and dispersion, coupling and stable packing. However, in the water-based paint, due to the reason of cost controlling , cannot use much more expensive dispersant. Most of the products c
Article July 20, 2017 -
The Main Harm To Boiler By Poor Water Quality
Deposit: The thermal conductivity of scale is very poor, and its thermal conductivity is only about 1% of the steel plate of boiler. Due to the serious impact of the heat conduction of the boiler, it must rely on the furnace temperature to ensure evaporation. The amount of coal and the amount of bla
Article July 19, 2017 -
The treatment of industrial circulating water
1.Physical way: Membrane treatment: This method is mainly through the use of special film for the full use of recycled water in the specified ingredients for effective selective. In this treatment method also includes two other treatment methods, respectively, nanofiltration treatment and reverse
Article July 18, 2017 -
Classification and use of water treatment chemicals
Performance characteristics of Flocculant:The flocculant’s formula is +CH2-CHn. It belongs to the linear polymer and the molecular weight is between 400 to 20 million. Flocculant can be processed from the city of domestic sewage separation of flocculation, degradation of the efficient combination of
Article July 13, 2017 -
Chemical Methods of Industrial Circulating Water Treatment
Chemical methods for industrial circulating water treatment are mainly through the killing agent, scale inhibitor, corrosion inhibitor and composite water treatment agent to complete the industrial drainage cooling treatment. It can significantly improve the recycling of recycled water, inhibit corr
Article July 11, 2017 -
The mechanism of industrial circulating water treatment
1.AntiscaleThere are many slightly soluble salt substances in the water. These substances will continue after the heat deposition and eventually forming the material for the scale. Scale is the most common substance in industrial circulating water and often leading to serious fouling. Therefore, eff
Article July 10, 2017 -
Research Progress of Multifunctional Water Treatment Agents
Water treatment agent is mainly used for scale inhibition, corrosion inhibition, flocculation, sterilization, etc., to reduce the water pipes and other metal equipment corrosion, to remove the suspended solids and harmful substances, deodorant decolorization, softening and stable water quality. The
Article July 07, 2017 -
Physical method of industrial circulating water treatment
At present, the chemical method is still the common method of industrial circulating cooling water treatment in China. However, because of its corrosive and toxic, in the use of the scope and object have a certain limit. Therefore, in some cases, it should choose the physical method. The mature ways
Article July 05, 2017