TF-260
Product Description
TF-260 Acid Detergent for RO Membrane
Properties:
1. Suitable for all aromatic polyamide membranes.
2. Low froth formula.
3. Diluent pH 3.0-4.0.
4. Liquid chemicals, mix well.
5. Can be used repeatedly.
TF-260 is an acid liquid formula, it can remove metal hydroxide, calcium carbonate and other types of scales.
Dosage:
Dilute to 1-3% (1:45).
Specification:
Items | Index |
Appearance | Colorless to pale yellow transparent liquid |
pH , (1% water solution) | 2.0-3.0 |
Density (20℃)g/cm3 | 1.05 min |
Storage temperature | Not lower than -10℃ |
Usage:
(1) Check water box, pipeline and filter, change the filter material if needed.
(2) Input q.v. RO effluence to water box.
(3) Input q.v. TF-260 to water box, mix the solution with water pump, measure pH.
(4) Clean the system repeatedly, measure pH 5-20 minutes. After pH rise to 4, input q.v. TF-260 or acid, till pH not rise, meaning cleaning is end.
(5) If pollution is serious, sometimes the first batch detergent should be evacuated and the next batch should be required.
(6) Pay attention to solution temperature, don’t exceed the required temperature .
Package and Storage:
Normally in 200L HDPE drum, 1000L IBC, or customers’ requirement.
Storage for ten months in shady room and dry place.
Safety Protection:
Avoid contact with eye and skin, once contacted, flush with water.