Article
-
Principle of Waterborne Coating DispersantMost of the dispersant achieve the purpose of dispersing the color filler through the process of wetting, grinding and dispersion, coupling and stable packing. However, in the water-based paint, due to the reason of cost controlling , cannot use much more expensive dispersant. Most of the products cArticle July 20, 2017
-
The Main Harm To Boiler By Poor Water QualityDeposit: The thermal conductivity of scale is very poor, and its thermal conductivity is only about 1% of the steel plate of boiler. Due to the serious impact of the heat conduction of the boiler, it must rely on the furnace temperature to ensure evaporation. The amount of coal and the amount of blaArticle July 19, 2017
-
The treatment of industrial circulating water1.Physical way: Membrane treatment: This method is mainly through the use of special film for the full use of recycled water in the specified ingredients for effective selective. In this treatment method also includes two other treatment methods, respectively, nanofiltration treatment and reverseArticle July 18, 2017
-
Classification and use of water treatment chemicalsPerformance characteristics of Flocculant:The flocculant’s formula is +CH2-CHn. It belongs to the linear polymer and the molecular weight is between 400 to 20 million. Flocculant can be processed from the city of domestic sewage separation of flocculation, degradation of the efficient combination ofArticle July 13, 2017
-
Chemical Methods of Industrial Circulating Water TreatmentChemical methods for industrial circulating water treatment are mainly through the killing agent, scale inhibitor, corrosion inhibitor and composite water treatment agent to complete the industrial drainage cooling treatment. It can significantly improve the recycling of recycled water, inhibit corrArticle July 11, 2017
-
The mechanism of industrial circulating water treatment1.AntiscaleThere are many slightly soluble salt substances in the water. These substances will continue after the heat deposition and eventually forming the material for the scale. Scale is the most common substance in industrial circulating water and often leading to serious fouling. Therefore, effArticle July 10, 2017
-
Research Progress of Multifunctional Water Treatment AgentsWater treatment agent is mainly used for scale inhibition, corrosion inhibition, flocculation, sterilization, etc., to reduce the water pipes and other metal equipment corrosion, to remove the suspended solids and harmful substances, deodorant decolorization, softening and stable water quality. TheArticle July 07, 2017
-
Physical method of industrial circulating water treatmentAt present, the chemical method is still the common method of industrial circulating cooling water treatment in China. However, because of its corrosive and toxic, in the use of the scope and object have a certain limit. Therefore, in some cases, it should choose the physical method. The mature waysArticle July 05, 2017
-
Discussion on Optimization of Circulating Water System Management in Thermal Power Plant(2)1.Technical Scheme of Circulating Water Treatment in Thermal Power Plant: In the new period, the demand for energy resources continued to increase. The thermal power plants became the main places of energy production and made great contributions to the supply of social energy. As the thermal poweArticle July 04, 2017
-
Discussion on Optimization of Circulating Water System Management in Thermal Power Plant(1)1.Problems of Thermal Power Plant Circulating Water System:A thermal power plant has three generating units, respectively, 25MW, 25MW, 50MW, while connected with the fish pond. There are more serious corrosion problems and biological slime problems. Because of the corrosion problems, it caused condeArticle June 30, 2017